Main Menu         Contact Us  
     
LINEAR QUADRO LED   TIXS EXTERIOR LED WALL   OBLONG EXTERIOR UP / DOWN LED  
The linear pendant is available in both 65mm and 80mm square section utilizing Tridonic drivers and LED strip. It is available in lengths from 400mm up to 4 metres long. When utilizing bell dimming it can also be fully dimmed. It has an Acrylic diffuser with integrated driver and is manufactured from aluminium. It is available in all our standard powder coat finishes. For more information follow the link here   The Tixs exterior wall bracket is made with the timeless beauty of natural copper or natural brass. The uncoated copper exhibits a rustic feel as the shield oxidizes to a copper patina.
The Tixs wall bracket with integrated 8.7W LED
can be dimmed using the recommended dimmer to 50% if required. For more information follow the link
here
 
The Oblong wall light is manufactured from marine grade 316 stainless steel and coupled with twin integrated 8.7W LEDs in an up down light output. The stainless shield has been brushed and clear coated and fitted with satin glass diffusers. The LEDs can be dimmed by 50 % utilizing a recommended phase cutting dimmer. If set and forget is your motto this fits the bill. For more information follow the link
here


 
     
CENTRIK 4 LIGHT PENDANT   COCENTRIK   HORIZON PENDANT  
The centrik fitting pictured here is manufactured from 4 different ring sizes 250mm to 400mm in diameter and powder coated black outside with a brushed and clear laquered internal finish. It is suspended from two clear  flexes with a 50mm rectangular centre body. This product is a made to order fitting and is available in our standard range of powder coats and aluminium finishes. For more information follow the link here   This simple modern range allows the ease of modular build to achieve your own personal finish. The Cocentrik fitting shown here can have each individual ring positioned as desired to allow variation in the third dimension. The fitting is made from 5mm Aluminium and is rolled and welded into 4 different sized rings starting at 250mm diameter and through to 400mm diameter. It can be hung as a simple pendant or multiple pendants and is easily fitted to rods allowing versatility in terms of wall fittings and close to ceiling fitting if required. It comes standard with an E27 or BC Lampholder. For more information follow the link here   A simple streamlined pendant The Linear Horizon is hand manufactured from lifetime copper or brass or available in steel in our extensive range of standard colours. It is fitted with quality LED strip that is both dimmable and of high lumen output. This pendant will suit both domestic and commercial applications. Because it is hand manufactured there is a large range of size and material options available as well as our extensive range of specialized finishes for both brass and copper. For more information follow the link here  

 
   
SOCA Pendant with 8.5W LED   PETTICOAT Pendant with ES Lampholder   METRO 15 with triple plated flex and 17W LED  

Spun on a segmented chuck that is dismantled after spinning and then rebuilt for the next spinning very much like a 3D puzzle results in this smooth pendant. The SOCA pendant pictured has been finished in a brushed aluminium outside with the bottom edge sand blasted for contrast. It has been powder coated white inside and has been fitted with an integrated 8.5 Watt Led that is 50% dimmable. Its diameter is approximately 200mm and can be supplied in any of our standard colours or brushed aluminium finish. It is also available with other light sources such as GU10, BC or ES as well as low voltage. For more information follow the link here.


 

This unusual pendant is spun on a steel tool. The skirt is achieved through work hardening the aluminium when spinning and as a consequence no two products are the same. The pendant measures approximately 520mm in diameter 250mm high and comes standard with an E27 lamp holder on 1 metre flex. It is available in our standard powder coat finishes or can be custom sprayed to match most Dulux colours. It can also be manufactured in a 17W LED with fitted flat plate. It is a made to order item and requires a little more lead time than most of our standard fittings. It is only available in aluminium.

 

This new Metro 15 pendant is fitted with a 17W LED  is sandblasted in the middle as well as inside the tube. It is then clear coated and powder coated black. This sample has been suspended using triple cables platted together. It is manufactured from 150mm diameter aluminium tube 3mm thick and 600mm long. It is available either on a rod or a pendant. Other light sources and length variations are available on request. It can be powder coated any of our standard colours. For more information follow the link here

 
     
TUBE SPOT side mountwith removable snoot   Early 20th Century Planters   Copper Planter 5.1/2 inch diameter  
This 60mm diameter Tube spot is a variation on our standard with side entry swivel. It is available in both low voltage or GU10 light sources and is readily fitted to either a canopy for wall and ceiling mount or most track adaptors. The front snoot is a push fit and allows removal for easy globe changeovers. The units pictured are powder coated mannex black but are obviously available in all our standard finishes. For more information follow the link here. Made from pig iron these planter chucks were manufactured in the early 1900's and are available in the imperial sizes of 5 ½, 6 ½, 9 and 11 inch. Spun from aluminium, brass or copper they can be finished in any of our standard finishes. This planter has been spun in 1.2# Copper antiqued and then polished on the edges.
         
ORBIT 200 with 17W LED   ORBIT 200 with 6mm Twisted Rod   ORBIT 250 with E27 Lampholder  
The Orbit 200 is a 200mm diameter hemi spun in Aluminium. It is powder coated on the outside in Dulux matt black with orange powder coat inside the hemisphere. It is fitted with a 17 Watt LED but is also available in a 13W and 8.5 Watt version as well as with a low voltage G4-G6.35 Lampholder.   This Orbit 200 has been fitted with a 6mm Ali rod that has been randomly twisted. It has an overall drop of 1 metre.   The Orbit 250 is a 250mm diameter hemi spun in Aluminium or copper. It is available in a brushed aluminium and all our standard powder coated finishes or on a made to order basis in copper. This fitting has been spun in copper and heat treated to give a full range of metalic colours from purple to yellow. It has then be coated with a clear laquer to maintain the colours and stop the patina  

     
PLAZA LOW VOLTAGE MINI EXTERIOR   KEWPRA 13W LED WALL BRACKET   CENTURI PENDANT  
The Plaza mini exterior wall bracket is made with powder coated or brushed aluminium reflectors and marine grade 316 stainless steel backplate that is powder coated black. The marine grade stainless makes this fitting very suitable to beach side proximity and will not rust.
The fitting comes fitted with a frosted glass diffuser top and bottom and a 12 Volt ceramic Stucci lampholder. For more information follow the link here.
  The Kewpra up light wall bracket is available with both a copper or aluminium reflector and comes standard with an opal diffuser. It is fixed through fasteners in the top of the fitting hence there are no visible fixing screws giving a clean modern finish. The light source is a 13W LED and the overall dimensions of 150mm x 160mm make it a very compact fitting. It is available in all our standard powder coat finishes. For more information follow the link here.   This impressive large pendant measures 1.1 metres wide and comes standard with a 4 light E27 Hub. Each of the lamps is fitted with a swivel allowing adjustment of the globe position. It accepts most ES Low energy and LED globe options. There is also an optional acrylic diffuser available if required. The standard rod length is 500mm though this can be extended if required. It is also available in a 3 lite 11 Watt Osram LED version. The size and obvious variations of this fitting including the full range of our standard powder coats means it is a made to order item and requires alittle more lead time than the average fitting. For more information follow the link here.  
           
     
COPPER METRO 8's   CUBIC GRANDE   ORBIT 750  
A full range of Tube pendants and close to ceiling mountings are now available in copper. Available in 102mm,76mm, 65mm, 52mm and 38mm diameters. The pendants come standard with copper canopies and can be suspended by flex,rod or chain. Lengths can vary and be manufactured to requirements These are a made to order item price and lead times avaialble on request.   Our new Cubic Large fitting is available with shields in all our standard powdercote finishes as well as stainless and copper. It comes standard with ES lampholder allowing a range of energy efficient and LED globes. There are no visible fixing screws giving a clean modern finish. For more information follow the link here.   A large modern pendant, available in brushed aluminum and a range of colours. This pendant will suit both domestic and commercial applications. Copper and Brass version available on a made to order basis. The Orbit 750 comes standard with an E27 lamp holder, 100mm diameter canopy and 1m of flex, but can also be fitted with a rod if required. This pendant can be fitted with energy saving globes. For more information follow the link here.  
   
 
STUDIO LONG   ORBIT 600   VECTOR & MINI VECTOR LED VERSIONS  
The exterior Studio Long wall bracket is made with the timeless beauty of natural Copper or modern look marine grade Stainless Steel and is also available in any of our standard powder cote finishes. It comes standard with an ES lampholder suitable for energy efficient lamps. The Studio Long is also available in a GU10 version. For more information follow the link here.   A large modern pendant, available in brushed aluminum and a range of colours. This pendant will suit both domestic and commercial applications.
The Orbit 600 comes standard with an E27 lamp holder, 80mm diameter x 25mm canopy and 1m of  flex, but can also be fitted with a rod if required. This pendant can be fitted with energy saving globes. For more information follow the link here.
  All our Vector ranges are now available in LED Versions. Our Vector Flush and Standard Vectors are available in a 13W Linear Warm LED (2900-3200K). Output of 910lm minimum and typical output of 940lm. Our mini Vector comes with a 17W Round Warm LED (2900-3200K). This LED has a typical output of 1300lm. Both LEDS are rated for over 30,000 hrs. For more information follow the link here.  

 
 
 
SLEEK WALL BRACKET   RAND   PLASTER SUSPENSION KITS  
Our new Sleek Wall Bracket comes standard as an 18W compact Flurescent. It is available with shields in all our standard powdercote finishes as well as brushed Ali with a clear laquer. It comes standard with an opal acrylic diffuser. There are no visible fixing screws giving a clean modern finish. For more information follow the link here.   The Rand is simple cube shaped surface mount fitting with ceramic ES lampholder that will accomodate many energy efficient globes. It is available in any of our standard powder coat finishes. (Globe not included). For more information follow the link here.   Options for flex suspension in plaster ceilings and
 walls. Part numbers available in Lighting Accessories page.
For more information follow the link here.